欢迎来到深圳市欧意美环保科技有限公司~

您现在的位置:首页 >产品中心 > 臭氧发生器

型号:SY-G500L

Quartz Ozone Generator 

Model 1: SY-G500L 

Model 2: SY-G800L

Model 3: SY-G1200L

Input: DC12V, 24V, AC110V,220V

  • 产品详细

    Main advantages: 
    (1) Low voltage input, low current, long life, no corrosion compared to the tip discharge ozone; 
    (2) Stable current, high output ozone compared to the vacuum pipe ozone at the same power; 
    (3) Safety, nondamageable easily, long life compared to the ceramic plate ozone; 
    (4) Eternal current to get stable working and long life compared to other glass pipe ozone; 
    (5) Made with high purity of Quartz pipe to get the long life working, when there is dusts collected after a long period there is lower output, you can clean the surface and get good result again 

    Technic Specs: 
    (1) Ozone power input with DC12V, 14KHz/3000-4000V output 
    (2) Power of 4-5W, output of 450-500mg/h; You can connect two pipes to get more output 
    (3) Input the ozone power with DC12, equip with a potentiometer, locate the output of 3000-4000V; When read the 330-350mA there is low output ozone to meet the indoor air to remove smoke and odors, the best to use timer; When read 380-400mA there is high output ozone to meet the water treatment in case or space air disinfection; 

    Applicable Areas: 
    Air/Water Purifier, Air Conditioner, Refrigerator, Bowl Cabinet, Ozone Machine... 
    Working Principle: The ozone pipe is working in the high voltage electric field and high frequency magnetic field to ionize   the oxygen around the helix pipe, so generate the ozone; We use the unstable atom to decompose, sterilize and remove   the odors, gas, virus and smoke etc. 

    Attentions: 
    (1) For water treatment, space or case sterilization you can adjust to the high output; 
    (2) For indoor air purification to remove odors and smoke you can locate the low output, and we suppose you equip with a timer discontinuously, after all the excessive ozone will harm the body; 
    (3) An electric fan is a must when working to disperse the heat; 
    (4) Do remember to use at a ventilating place or it will burn at a high temperature; 
    (5) Do not touch the pipe or leads in case of any electric shock; 
    (6) Use the SCM to control the circuit in case of any interfering.